Feature:
1. Higher efficiency and energy-saving compared to conventional fluorescents with equal bright.
2. No RF interference, no buzzing noise, no UV radiation.
3. No fluorescent flickering.
4. No hazard of mercury or lead entering the environment.
5. Recessed mounted, maintenance free, easy installation.
6. Solid- state, high shock/ vibration resistant
7. Adopting low- pressure constant current power supply, no glare,
8. Good quality and good heat dissipation
Model | PRS-RFL-10W | PRS-RFL-20W | PRS-RFL-30W | PRS-RFL-50W |
power | 10w | 20w | 30w | 50w |
Material | Die-cast Aluminum | |||
Luminous Flux | Flux:60LM/W | |||
Ra | ≥65 | |||
LED chip | COB/SMD | |||
Beam angle | 120° | |||
Guard rate | IP54 | |||
Wall charger output | 5V 500ma | 5V 500ma | 12.6V 500ma | 16.8V 1000ma |
car charger output | 5V 500ma | 5V 500ma | 12.6V 500ma | 16.8V 1000ma |
Work time | 3-4H | |||
Charging time | 4H | 7H | 4H | 2H |
Battery | 3.7V 2000mAh | 3.7V 2000mAh | 11.1V 2200mAh | 14.8V 2200mAh |
CTN | 47x36.5x43.5CM 20pcs/CTN |
47x41.5x52.5CM 20pcs/CTN |
57x50.5x31CM 10pcs/CTN |
69.5x60.5x34CM 10pcs/CTN |